2 sip alg, Figure 83 network > nat > alg, Table 51 network > nat > alg – ZyXEL Communications P-2602HW(L) Series User Manual
Page 149

P-2602H(W)(L)-DxA Series User’s Guide
Chapter 10 Network Address Translation (NAT) Screens
149
10.5.2 SIP ALG
Some NAT routers may include a SIP Application Layer Gateway (ALG). A SIP ALG allows
SIP calls to pass through NAT by examining and translating IP addresses embedded in the
data stream. When the ZyXEL Device registers with the SIP register server, the SIP ALG
translates the ZyXEL Device’s private IP address inside the SIP data stream to a public IP
address. You do not need to use STUN or an outbound proxy if your ZyXEL Device is behind
a SIP ALG.
Use this screen to enable and disable the SIP (VoIP) ALG in the ZyXEL Device. To access
this screen, click Network > NAT > ALG.
Figure 83 Network > NAT > ALG
Each field is described in the following table.
Apply
Click Apply to save your changes back to the ZyXEL Device.
Cancel
Click Cancel to begin configuring this screen afresh.
Table 50 Port Forwarding Rule Setup (continued)
LABEL
DESCRIPTION
Table 51 Network > NAT > ALG
LABEL
DESCRIPTION
Enable SIP ALG
Select this to make sure SIP (VoIP) works correctly with port-forwarding and
address-mapping rules.
Apply
Click this to save your changes and to apply them to the ZyXEL Device.
Reset
Click this to return to previously saved configuration.