ZyXEL Communications P-2602HW(L) Series - Manual (Page 136)

P-2602H(W)(L)-DxA Series User’s Guide
136 Chapter 9 Wireless LAN
9.7 MAC Filter
To change your ZyXEL Device’s MAC filter settings, click Network > Wireless LAN >
MAC Filter. The screen appears as shown.
Figure 74 MAC Address Filter
The following table describes the labels in this menu.
Table 43 MAC Address Filter
LABEL DESCRIPTION
Active MAC
Filter
Select the check box to enable MAC address filtering.
Filter Action Define the filter action for the list of MAC addresses in the MAC Address table.
Select Deny to block access to the ZyXEL Device, MAC addresses not listed will be
allowed to access the ZyXEL Device
Select Allow to permit access to the ZyXEL Device, MAC addresses not listed will be
denied access to the ZyXEL Device.
Set
This is the index number of the MAC address.