ZyXEL Communications P-2602HW(L) Series - Manual (Page 340)

P-2602H(W)(L)-DxA Series User’s Guide
340 Appendix B Splitters and Microfilters
1 Connect a phone cable from the wall jack to the single jack end of the Y- Connector.
2 Connect a cable from the double jack end of the Y-Connector to the “wall side” of the
microfilter.
3 Connect another cable from the double jack end of the Y-Connector to the ZyXEL
Device.
4 Connect the “phone side” of the microfilter to your telephone as shown in the following
figure.
Figure 198 Connecting a Microfilter
ZyXEL Device With ISDN
This section relates to people who use their ZyXEL Device with ADSL over ISDN (digital
telephone service) only. The following is an example installation for the ZyXEL Device with
ISDN.
Figure 199 ZyXEL Device with ISDN