ZyXEL Communications P-2602HW(L) Series - Manual (Page 174)

P-2602H(W)(L)-DxA Series User’s Guide
174 Chapter 11 Voice
11.19 Incoming Call Policy Screen
Use this screen to maintain rules for handling incoming calls. You can block, redirect, or
accept them. To access this screen, click VoIP > Phone Book > Incoming Call Policy.
Speed Dial Phone
Book
Use this section to look at all the speed-dial entries and to erase them.
Speed Dial This field displays the speed-dial number you should dial to use this entry.
Number This field displays the SIP number the ZyXEL Device calls when you dial the
speed-dial number.
Name This field displays the name of the party you call when you dial the speed-dial
number.
Destination This field is blank, if the speed-dial entry uses one of your SIP accounts.
Otherwise, this field shows the IP address or domain name of the SIP server or
other party. (This field corresponds with the Type field in the Speed Dial section.)
Modify Use this field to edit or erase the speed-dial entry.
Click the Edit icon to copy the information for this speed-dial entry into the Speed
Dial section, where you can change it.
Click the Remove icon to erase this speed-dial entry.
Clear Click this to erase all the speed-dial entries.
Cancel Click this to set every field in this screen to its last-saved value.
Table 63 Phone Book > Speed Dial
LABEL DESCRIPTION