York PREDATOR R-410A User Manual
Technical guide

®
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
528150-YTG-C-1109
TECHNICAL GUIDE
Description
ASHRAE 90.1 COMPLIANT
YORK
®
Predator
®
units are convertible single packages with a
common footprint cabinet and common roof curb for all 3
through 12-1/2 ton models. All 6-1/2 through 12-1/2 ton units
have two compressors with independent refrigeration circuits to
provide 2 stages of cooling. The units were designed for light
commercial applications and can be easily installed on a roof
curb, slab, or frame.
All Predator
®
units are self-contained and assembled on rigid
full perimeter base rails allowing for 3-way forklift access and
overhead rigging. Every unit is completely charged, wired,
piped, and tested at the factory to provide a quick and easy field
installation.
All units are convertible between side and down airflow.
Independent economizer designs are used on side and down
discharge applications, as well as all tonnage sizes.
Predator
®
units are available in the following configurations:
cooling only, cooling with electric heat, and cooling with gas
heat. Electric heaters are available as factory-installed options
or field-installed accessories.
All units provide constant supply air volume. A variable air
volume (VAV) option, featuring a variable frequency drive, is
available on 6-1/2 through 12-1/2 ton models only.
Tested in accordance with:
R-410A
ZH/ZJ SERIES
3 - 12-1/2 TON
60 Hertz
ZH/ZJ 3 THROUGH 10 TON
ZH 12-1/2 TON
ZJ 12-1/2 TON
®
Document Outline
- Description
- Table of Contents
- Component Location
- Nomenclature
- Features and Benefits
- Guide Specifications
- Physical Data
- Capacity Performance
- Airflow Performance
- ZH037-150 Side Duct Application
- ZH037-150 Bottom Duct Application
- ZJ037-150 Side Duct Application
- ZJ037-150 Bottom Duct Application
- RPM Selection
- Additional Static Resistance - 037 thru 061
- Additional Static Resistance - ZH-078 thru 150
- Airflow Performance
- Altitude/Temperature Correction Factors
- Gas Heat Minimum Supply Air
- Electric Heat Minimum Supply Air
- Indoor Blower Specifications
- Power Exhaust Specifications
- Electric Heat Multipliers
- Sound Performance
- Electrical Data
- ZH037-061 Standard Indoor Blower - Without Powered Convenience Outlet
- ZH078-150 Standard Motor - Without Powered Convenience Outlet
- ZH037-061 Hi Static Indoor Blower - Without Powered Convenience Outlet
- ZH078-150 Hi Static Motor - Without Powered Convenience Outlet
- ZH037-061 Standard Indoor Blower - With Powered Convenience Outlet
- ZH078-150 Standard Motor - With Powered Convenience Outlet
- ZH037-061 Hi Static Indoor Blower - With Powered Convenience Outlet
- ZH078-150 Hi Static Motor - With Powered Convenience Outlet
- ZJ037-061 Standard Indoor Blower - Without Powered Convenience Outlet
- ZJ037-061 Hi Static Indoor Blower - Without Powered Convenience Outlet
- ZJ037-061 Standard Indoor Blower - With Powered Convenience Outlet
- ZJ037-061 Hi Static Blower - With Powered Convenience Outlet
- ZJ078-150 Hi Static Motor - With Powered Convenience Outlet
- Typical Wiring Diagrams
- ZH/ZJ037-150 Typical Wiring Diagrams
- Typical ZH/ZJ037-061 Cooling Unit with Gas Heat 230 Volt Wiring Diagram
- Typical ZH/ZJ037-061 Cooling Unit with Gas Heat 460/575 Volt Wiring Diagram
- Typical ZH/ZJ037-061 Cooling Unit with/without Electric Heat Wiring Diagram
- Typical ZH/ZJ078-120 Cooling Unit with Gas Heat 230 Volt Wiring Diagram
- Typical ZH/ZJ078-120 Cooling Unit with Gas Heat 460/575 Volt Wiring Diagram
- Typical ZH/ZJ078-120 Cooling Unit with/without Electric Heat Wiring Diagram
- Typical ZH/ZJ150 Cooling Unit with Gas Heat 230 Volt Wiring Diagram
- Typical ZH/ZJ150 Cooling Unit with Gas Heat 460/575 Volt Wiring Diagram
- Typical ZH/ZJ078-150 Factory Installed VFD (Option)
- Typical ZH/ZJ078-150 Factory Installed VFD with Manual Bypass (Option)
- Typical ZH/ZJ078-150 Factory Installed VFD with CCS Control (Option)
- Typical ZH/ZJ078-150 Factory Installed VFD and Manual Bypass with CCS Control (Option)
- Typical ZH/ZJ078-150 BAS Ready Unit with Factory Installed VFD (Option)
- Typical ZH/ZJ078-150 BAS Ready Unit with Factory Installed VFD and Manual Bypass (Option)
- Typical ZH/ZJ078-150 VFD Ready Unit (Option)
- ZH/ZJ037-150 Typical Wiring Diagrams
- Weights and Dimensions
- ZH/ZJ037-150 Unit Weights
- ZH/ZJ037-150 Unit Accessory Weights
- ZH/ZJ037-150 Unit Dimensions
- ZH037-061 and ZJ037
- ZJ049 thru 061 and ZH/ZJ078 thru 120
- ZH150
- ZJ150
- ZH/ZJ037-150 Unit Physical Dimensions
- ZH/ZJ037-150 Unit Clearances
- ZH/ZJ037-150 Unit Bottom Duct Openings
- ZH/ZJ037-150 Unit Electrical Entry
- ZH/ZJ037-120 Unit Side Duct Openings
- ZH150 Unit Side Duct Openings
- ZJ150 Unit Side Duct Openings
- ZH/ZJ037-150 Unit Left Duct Opening
- ZH/ZJ037-150 Unit Accessory Dimensions
- Economizer Options