York AHP18 - Manual

TECHNICAL GUIDE
SINGLE PIECE AIR HANDLERS
FOR USE WITH SPLIT-SYSTEM
COOLING & HEAT PUMPS
MODELS: AHP18 THRU 60
Due to continuous product improvement,
specifications are subject to change without notice.
Visit us on the web at www.york.com
Additional rating information can be found at
www.ahridirectory.org.
ISO 9001
Certified Quality
Management System
255029-YTG-M-0610
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
DESCRIPTION
This fan coil line offers the ultimate in application flexibility. The
AHP (non-variable speed motor) models can be ordered upflow
only or as multi-position. The multi-position model can be
installed in downflow, upflow, horizontal right or left without the
need for additional field installed kits.
All UPG air handlers and coils utilize a TXV to provide our cus-
tomers with the optimum performance and refrigerant control
required for 13+ SEER systems. Air handlers can be ordered
with R410A TXV factory installed. Air handlers are also avail-
able with “Flex-coils” without a factory installed metering device.
For added flexibility, an R22 or R410A TXV can be field
installed to meet your refrigerant choice.
FEATURES
Thermal Expansion Valve - Provides the ultimate refrigerant
control required for today’s high efficient product. The UPG bolt-
on TXV provides the added flexibility to convert the air handler
to the required refrigerant. The UPG TXV is a true bolt-on which
does not require brazing to replace or install.
Insulated Cabinet - All air handler cabinets are thermally insu-
lated with 1” foil faced insulation (R-4.2) to prevent sweating.
For applications in extreme humidity conditions an optional,
field installed, external insulating wrap kit is also available.
Factory - Sealed to achieve 2% or less leakage rate with or
without field installed filter at 1.0” water gauge external static
pressure.
Durable Finish Inside and Out - Air handler casings are made
of pre-painted galvanized steel which provides a better paint to
steel bond that resists corrosion and rust creep. All internal coil
sheet metal parts are made of G90 galvanized.
High Efficiency - 5 ton unit has high efficiency DC motor.
4 HK Heat Kit - Installation friendly, easy service, more robust,
unique to new design.