York DNP036 User Manual
Description
036-21366-007-A-1205
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
TECHNICAL GUIDE
AFFINITY™ SERIES
SINGLE PACKAGE GAS/ELECTRIC
AIR COOLED AIR CONDITIONERS
2 THRU 5 NOMINAL TON
DNP024, 030, 036, 042, 048 AND 060
13 SEER
®
DESCRIPTION
York
®
Affinity™ Series packaged cooling/heating air condi-
tioners are designed for outdoor installation. Only utility and
duct connections are required at the point of installation.
The gas-fired heaters have aluminized steel tubular heat
exchangers and hot surface to pilot ignition. They are avail-
able in natural gas with field conversion to propane.
FEATURING
•
FACTORY MOUNTED TXV
•
COOLING/GAS HEATING UNITS (NATURAL GAS OR
PROPANE)
•
LOW PROFILE
•
QUIET OPERATION
•
COMMON FOOTPRINT
•
OPTIONAL SLIDE IN MOTORIZED DAMPERS
•
OPTIONAL SLIDE IN ECONOMIZERS
•
OPTIONAL PROPANE CONVERSION KIT
•
OPTIONAL HIGH ALTITUDE CONVERSION KIT
(NATURAL GAS/PROPANE)
•
OPTIONAL LOW NOx KIT
•
FULL PERIMETER BASE RAILS
•
BOTTOM AND SIDE UTILITY CONNECTIONS
•
1” OR 2” CLEANABLE FILTERS STANDARD ON ALL
3 PHASE MODELS. OPTIONAL ON 1 PHASE MODELS
•
WARRANTY - 1 PHASE
•
10 year compressor
•
20 year heat exchanger
•
5 year other parts
•
WARRANTY - 3 PHASE
•
5 year compressor
•
10 year heat exchanger
•
1 year other parts
Document Outline
- DESCRIPTION
- STANDARD FEATURES/BENEFITS
- FIELD-INSTALLED ACCESSORIES
- Table 1: PHYSICAL DATA
- Table 2: RATINGS COOLING/GAS HEATING
- Table 3: dnp024 cooling capacities - 2 ton
- Table 3: dnp024 cooling capacities - 2 ton (cont’d)
- Table 4: DNP030 COOLING CAPACITIES - 2-1/2 TON
- Table 5: DNP036 COOLING CAPACITIES - 3 TON
- Table 6: DNP042 COOLING CAPACITIES - 3-1/2 TON
- Table 7: DNP048 COOLING CAPACITIES - 4 TON
- Table 8: DNP060 COOLING CAPACITIES - 5 TON
- Table 9: TWO TON AIR PERFORMANCE
- Table 10: SIDE SUPPLY AIR BLOWER PERFORMANCE - 208/230 VOLTS
- Table 11: BOTTOM SUPPLY AIR BLOWER PERFORMANCE - 208/230 VOLTS
- Table 12: ADDITIONAL STATIC PRESSURE RESISTANCE - 2, 2-1/2, 3 TON
- Table 13: ADDITIONAL STATIC PRESSURE RESISTANCE - 3-1/2, 4 and 5 TON
- TABLE 14: ELECTRICAL DATA
- Table 15: UNIT DIMENSIONS FRONT
- Table 16: UNIT MINIMUM CLEARANCES
- Table 17: UNIT WEIGHTS AND CENTER OF GRAVITY
- TYPICAL WIRING DIAGRAM NOTES
- MECHANICAL SPECIFICATIONS