ZyXEL Communications NBG-415N - Manual (Page 92)

ZyXEL NBG-415N User’s Guide
Chapter 7 Advanced 92
The following table describes the labels in this screen.
Table 37 Advanced: MAC Filter
LABEL DESCRIPTION
Enable Select Enable MAC Address Filter to activate this setting. Clear this check box to
disable it.
Filter Settings
Mode Select only deny listed machines to block frames to/from the specified MAC
address(es).
Select only allow listed machines to forward frames to/from the specified MAC
address(es).
Filter Wireless
Clients
Select this option to apply the filter settings to the wireless clients.
Filter Wired
Clients
Select this option to apply the filter settings to the wired computers on the LAN.
Add MAC Address
Enable Select Enable to activate this filter setting. Clear this check box to disable it.
MAC Address Enter the MAC address (in six pairs of dotted haxidecimal notation) of a computer
whose traffic you want to filter. Or select a computer MAC address from the drop-
down list box.
Copy Your PC’s
MAC Address
Click this button to copy the MAC address of your computer.
Note: In order for the ZyXEL Device to copy your computer’s MAC
address, your computer must be connected directly to the
ZyXEL Device.
Save Click Save to save the settings in this part of the screen.
Clear Click Clear to start configuring this part of the screen again.
MAC Address List
Enable Select this option to activate this filter setting. Clear this check box to disable it
without deleting it.
Computer Name This field displays the name of the computer.
MAC Address This field displays the MAC address of a computer whose traffic you want to filter.