4 wan connection: pptp, Figure 34 basic: wan: pptp – ZyXEL Communications NBG-415N User Manual
Page 48
ZyXEL NBG-415N User’s Guide
Chapter 4 WAN
48
for other field descriptions.
4.2.4 WAN Connection: PPTP
If your ISP uses PPTP protocol for Internet access, select PPTP in the WAN Mode field.
Figure 34 Basic: WAN: PPTP
Service Name
Type the PPPoE service name given to you by your ISP. PPPoE uses a service
name to identify and reach the PPPoE server. You can use alphanumeric and -
_@$./ characters, and it can be up to 64 characters long.
Reconnect Mode
Specify how you want to re-establish an Internet connection after the idle timeout.
Select Always On when you want your connection up all the time. The ZyXEL
Device will try to bring up the connection automatically if it is disconnected.
Select On Demand when you don't want the connection up all the time and
specify an idle time-out in the Maximum Idle Timeout field.
Select Manual when you want to manually re-establish the connection if it is
disconnected.
Maximum Idle
Time
This value specifies the time in seconds that elapses before the ZyXEL Device
automatically disconnects from the PPPoE server.
Table 15 Basic: WAN: PPPoE (continued)
LABEL
DESCRIPTION