ZyXEL Communications NBG-415N - Manual (Page 75)

ZyXEL NBG-415N User’s Guide
75 Chapter 7 Advanced
Figure 47 Advanced: Virtual Server
The following table describes the labels in this screen.
Table 28 Advanced: Virtual Server
LABEL DESCRIPTION
Active Select this check box to enable this virtual server setting. Clear this check box to
disallow forwarding of these ports to an inside server without having to delete the
entry.
Name Enter a name to identify this port-forwarding rule.
Alternatively, select a pre-defined name from the drop-down list box to have the
ZyXEL Device fill in the default port numbers for the selected service.
IP Address Enter the inside IP address of the inside server.
Alternatively, select the name of a LAN computer from the drop-down list box to have
the ZyXEL Device fill in the IP address of the computer.
Protocol Select the protocol type (TCP, UDP or Both).
Private Port Enter the port number to which you want the ZyXEL Device to translate the public
port.
Public Port Enter the incoming port number for the selected service.
Inbound Filter Select a filter action on the traffic. Select You can configure filter actions in the
Inbound Filter screen.
Schedule Select the name of a time setting during which this setting is active. You can
configure schedules in the Schedules screen.
Save Click this button to save the changes of a configuration screen for the current
session.
Clear Click this button to start configuring a screen again.
Virtual Server List