ZyXEL Communications NBG-415N - Manual (Page 106)

ZyXEL NBG-415N User’s Guide
Chapter 8 Tools 106
8.3 E-mail
Click Tools > E-mail configure where the ZyXEL Device is to send logs and alerts.
DST Start Configure the day and time when Daylight Saving Time starts if you selected
Enable Daylight Saving. The Time field uses the 24 hour format. Here are a
couple of examples:
Daylight Saving Time starts in most parts of the United States on the first Sunday
of April. Each time zone in the United States starts using Daylight Saving Time at 2
A.M. local time. So in the United States you would select 1st, Sun, Apr and select
2 am in the Time field.
Daylight Saving Time starts in the European Union on the last Sunday of March.
All of the time zones in the European Union start using Daylight Saving Time at the
same moment (1 A.M. GMT or UTC). So in the European Union you would select
the last Sun, Mar. The time you select in the Time field depends on your time
zone. In Germany for instance, you would type 2 because Germany's time zone is
one hour ahead of GMT or UTC (GMT+1).
DST End Configure the day and time when Daylight Saving Time ends if you selected
Enable Daylight Saving. The Time field uses the 24 hour format. Here are a
couple of examples:
Daylight Saving Time ends in the United States on the last Sunday of October.
Each time zone in the United States stops using Daylight Saving Time at 2 A.M.
local time. So in the United States you would select the last Sun, Oct and select 2
am in the Time field.
Daylight Saving Time ends in the European Union on the last Sunday of October.
All of the time zones in the European Union stop using Daylight Saving Time at the
same moment (1 A.M. GMT or UTC). So in the European Union you would select
the last Sun, Oct. The time you select in the Time field depends on your time
zone. In Germany for instance, you would type 2 because Germany's time zone is
one hour ahead of GMT or UTC (GMT+1).
Automatic Time
Configuration
Enable NTP
Server
Select this option to have the ZyXEL Device get the time and date from the
Network Time Protocol (NTP) time server you specified below.
NTP Server Used Enter the IP address (in dotted decimal notation) of the time server or select one
from the pre-defined list.
Set the Date and
Time Manually
These fields display when you clear the Enable NTP Server checkbox.
Date and Time Set these fields to configure the system date and time.
Copy Your
Computer’s Time
Settings
Click this button to get the system date and time from your computer.
Table 43 Tools: Time (continued)
LABEL DESCRIPTION