ZyXEL Communications NBG-415N - Manual (Page 85)

ZyXEL NBG-415N User’s Guide
85 Chapter 7 Advanced
Figure 56 Advanced: Access Control: Wizard: Select Machine
The following table describes the labels in this screen.
Table 32 Advanced: Access Control: Wizard: Select Machine
LABEL DESCRIPTION
Address Type Select the address type this rule checks.
IP Address This field is applicable when you select IP in the Address Type field above.
Enter the IP address of a device to which you want to apply this rule. Alternatively,
select a device name from the drop-down list box.
MAC Address This field is applicable when you select MAC in the Address Type field.
Enter the MAc address of the device to which you want to apply this rule.
Alternatively, select a device name from the drop-down list box.
Copy Your PC’s
MAC Address
This button is applicable when you select MAC in the Address Type field.
Click this button to copy the MAC address of your computer.
OK Click OK to add the Ethernet device settings.
Cancel Click Cancel to start configuring this part of the screen again.
Machine This field displays the IP address or MAC address of the Ethernet device(s) to
which the access control policy is applied.
Schedule Specify the time this rule is active.
Select the name of a schedule from the drop-down list box. You can configure a
schedule in the Schedule screen.
Apply Web Filter Select this option to apply the web filters you configure in the Web Filter screen.
Log Internet
Access
Select this option to set the ZyXEL Device to create logs for Internet access
activity.
Filter Ports Click this button to display the fields you use to configure port filters.
Port Filter Rules
Enable Select this option to activate this rule. Clear this check box to deactivate this rule.
Name Enter a descriptive name for identification purposes.
Dest IP Start Enter the start of the destination IP address range.
Dest IP End Enter the end of the destination IP address range.
Protocol Select a protocol type from the drop-down list box.