Wayne-Dalton TORQUEMASTER 6100 User Manual

Page 20

Tools Needed:

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the

Find a Dealer section online at www.wayne-dalton.com

TorqueMaster

Spring Tube

TorqueMaster

springs come lubricated

and pre-assembled inside the
TorqueMaster

spring tube.

To install, lay the TorqueMaster

spring

tube on the floor (inside garage) in front
of the door with the labeled end to the
left.

labElED END

TORquEMasTER

sPRING TubE

None

Adjusting Top Roller Slide

With horizontal tracks installed, you can
now adjust the top roller slide.

Vertically align the top section of the
door with the lower sections. Once
aligned, position the top roller,
out against the horizontal track, while
keeping the roller slide parallel with the
section.

Maintaining the slide’s position,
tighten the (2) 1/4” - 14 x 5/8” self
tapping screws.