VMware GSX 3 - Manual (Page 213)

C H A P T E R 7 High-Availability Configurations with VMware GSX Server
213
1. Start the node 2 virtual machine.
2. Repeat step 2 and step 3 in the procedure for the first node.
3. Start the Disk Management tool and assign the first shared disk to Q: (quorum)
and the second disk to R: (data).
4. Start dcpromo.exe and add this virtual machine as a domain controller in the
same domain created in step 8 for the first node, or add it to an existing domain.
Note: The setup in node 2 must match the setup in node 1, which you specified
in step 8 for node 1.
5. In the node 1 virtual machine, start the cluster service.
• From Cluster Manager, right-click the node name.
• Select Start Cluster Service.
6. In the node 2 virtual machine, repeat step 14 through step 24 in Installing
Microsoft Clustering Services on the Cluster Nodes on page 211 , with one
exception: in step 18, select Join a Cluster.
You are now finished configuring the cluster.