Visioneer NETSCAN 4000 User Manual

Page 51

ISIONEER

ETSCAN

4000 U

SER

’

UIDE

Transmission
Report

Select if you want to print the fax transmission report. This report
lists the time and date of transmission and whether the transmission
was successful (OK). If you select Yes, a report will be printed after
each transmission. If you select Error, the report will only be printed
when a fax fails to transmit.
Choices: *Yes, No, Error only

Fit to Page

Choose Enable to scale the entire contents of your receiving fax to fit
into the paper of the printer. If this setting is disabled, an incoming
image larger than the page splits across multiple pages.
Choices: *Enable, Disable

Detect Dial
Tone

Choose Enable to allow this scanner to wait for and detect a dial
tone before proceeding with dialing. If you are using the scanner on
the same line as your phone, turn on the detect dial tone setting.
This will prevent the scanner from sending a fax while someone is on
the phone.
Choices: Enable, *Disable

Detect Busy
Tone

Choose Enable to allow this scanner to detect a busy tone when
sending a fax.
Choices: *Enable, Disable
(The default setting varies based on country code.)

Manual
Receive

Choose Enable to use the Manual Receive fax function or Disable to
use the auto receive fax function. When Manual Receive is enabled,
and there is an incoming fax, and the machine starts ringing you
need to press the Start button, in the Fax working mode, to receive
and print the fax.
Choices: Enable, *Disable

ECM Mode

Choose Enable to use “ECM Mode”. The Error Correction Mode
function helps this scanner to improve communication in areas
where telephone line conditions are poor.
Choices: *Enable, Disable

* Factory Default

Fax Settings :

Used to specify additional fax settings.

Item

Description