Visioneer NETSCAN 4000 - Manual (Page 15)

8 V ISIONEER N ETSCAN 4000 U SER ’ S G UIDE
Status LEDs—Indicates the hardware status.
B
EFORE
Y
OU
B
EGIN
The scanner has to be setup properly on your network to perform the
e-mail and filing functions. Before using the scanner, please setup the
scanner properly on your network for e-mail and filing function. The
following network parameters have to be set.
■ The Power LED—Used to indicate the power on and ready
status.
■ The Alarm LED—Used to indicate hardware and
transmission errors.
■ The Energy Saving LED—Used to indicate power-saving
status.
Important: Make a copy of the following table and ask your Network
Administrator to complete the information.
1. DHCP Enable:
2. IP Address: . . .
3. Subnet Mask: . . .
4. Gateway IP: . . .
5. DNS Server: . . .
6. SMTP Server:
7. SMTP Port: 25
8. POP3 Server:
9. POP3 Port:
10. LDAP Server: . . .
11. LDAP Port: