Visioneer NETSCAN 4000 - Manual (Page 25)

18 V ISIONEER N ETSCAN 4000 U SER ’ S G UIDE
T
URN ON THE
P
OWER
Press the power switch to the “|” position to turn on the scanner. After
showing the booting up message, the LCD screen displays the preset ready
status.
Note: After the scanner is turned on, you can press the Energy Saving
button on the control panel to switch to the power saving mode. If
the
scanner is idle for 15 minutes (default setting), it automatically
shuts off the scanning lamp. Press any key except the Energy Saving
button to return to the ready status.