Visioneer NETSCAN 4000 - Manual (Page 144)

U SING THE S HORTCUT B UTTONS
137
U
SING THE
S
HORTCUT
B
UTTONS
To use a shortcut button:
1. Set your default working mode to be Shortcut by pressing the Menu
button on the control panel, and then choose Management>Device
Management>Default Mode>Shortcut in succession on the LCD-
screen touch panel. Press OK to save the change.
Or you can set the default working mode via the scanner’s embedded
web page and choose Management>Default Mode>Shortcut in
succession. Press Update to save the change.
2. Press the Reset button on the control panel. The LCD-screen shows
the following Shortcut display.
Note: If an administrator password has been set, setting the scanner
to use the shortcut button mode will require a password be entered
when accessing this function through either option.