Visioneer NETSCAN 4000 - Manual (Page 21)

14 V ISIONEER N ETSCAN 4000 U SER ’ S G UIDE
U
NLOCKING THE
S
CAN
U
NIT
The scan unit is locked during transport to protect the scanning
mechanism from being damaged. Be sure to unlock the scan unit before
using the machine.
1. Open the document cover. Locate the lock switch at the left side.
2. Move the lock switch to the “unlocked position”.
Scanner lid
Unlocked position
Locked position
Note:
If you need to move the scanner for repair or any other reason, be sure to
lock the scanner before moving. To lock the scanner, please do the
following:
1. Turn off the scanner.
2. If the scan unit is not located at the front of the glass, turn on the
scanner. After the scan unit returns to the front end, turn off the
scanner.
3. Move the lock switch to the “Locked Position”.