Visioneer NETSCAN 4000 - Manual (Page 122)

I NFORMATION M ESSAGES
115
Command error Reboot the machine, and try again. If the error is still there,
contact your nearest dealer.
Parameters or argument error 1. Check if the Device Name is valid. The Device Name can
be found in Menu>General.
2. Check “From” address.
3. Check “To” address.
4. Contact your network administrator for further help.
Command parameters not
implemented Check if the Device Name is valid. The Device Name can be
found in Menu>General.
Or you may contact your network administrator for further
help.
Authentication requires Contact your network administrator on mail server’s
authentication mechanism.
Choose SMTP authentication for E-mail security or turn off
the mail server’s authentication and try again.
Mailbox unavailable Check “To” address.
User not local Check “To” address.
Service unavailable Contact your network administrator for further help.
Mail server does not support
SMTP service extension Contact your network administrator for further help.
Exceeded storage allocation 1. Check “To” address.
2. Check mailbox storage allocation.
3. Contact your network administrator for further help.
Mailbox name is not allowed Check “To” address.
Mail action has not been taken Check “To” address.
Connection error 1. Check network environment.
2. Check if email attachment size is larger than the mailbox
quota.
I
NFORMATION
M
ESSAGES
D
URING
E-M
AILING
Message Action