How to, Get help, Save changes – USRobotics NETServer/8 User Manual
Page 152: View the global configuration table, 2 command reference, All of the parameters displayed are configurable
10-2 Command Reference
How to . . .
Get help
To bring up a list of command options for Global Configuration,
use the following command:
help set global
Save Changes
To save any configuration changes you have made, use the
following command:
save global
View the Global Configuration Table
To view Global Configuration, type:
show global
The information you see might look something like this:
System Name: Cincinnati
Default Hosts: 192.77.203.54
192.77.203.55
192.77.203.64
192.77.203.65
IP Gateway: 192.77.203.12
Gateway Metric: 1
IPX Gateway: 0000A462:000000AC1262
Gateway Metric: 1
Default Route: Quiet (Off)
Domain: My_Domain.com
Name Service: DNS
DNS Cache Timeout: 0 days 0 hours 30 minutes (30 min)
Name Servers: 192.77.203.13
0.0.0.0
0.0.0.0
Sys Loghosts: 0.0.0.0
0.0.0.0
RADIUS Server: 192.77.203.100
Alternate Server: 0.0.0.0
Accounting Server: 192.77.203.100
Alt. Acct. Server: 0.0.0.0
Telnet Access Port: 23
Assigned Address: 192.77.203.101
Reported Address: 0.0.0.0
ICMP error Logging: OFF
Connect Message: ON
Dial !root Access: ON
Random Hosts List: OFF
SNMP agent: OFF
Proxy Arp: OFF
PPP PAP Auth: ON
All of the parameters displayed are configurable.