USRobotics NETServer/8 User Manual
Page 111
Talking to the Modems 7-7
Caution:
Avoid using commands that write to the modem’s
NVRAM (such as &W) in an initialization script that you plan to
use indefinitely. Rewriting the NVRAM every time the port is
reset may eventually wear the NVRAM out. Use such com-
mands only on a short term basis.
The following special characters are allowed. \r should always
be present at the end of any modem initialization string:
\r
carriage return
\n
line feed
\0xx octal digit in the xx
\\
single backslash
Use an Existing Initialization Script
A port is not sent any script until an existing script is assigned to
it. Type the following command:
set s