USRobotics NETServer/8 - Manual (Page 146)

9-12 Administrative Tools
show arp
Show arp allows you to view IP address resolution information
for the given interface. To use this command, type
show arp
can be one of the following:
net0 The LAN port
ptp A point to point connection on port
S
The NETServer will respond with a list of IP addresses, followed
by the corresponding MAC addresses. Each response is similar
to the following:
192.77.206.199 at 08:00:20:76:89:9B
show flash
If you want to know how much flash memory your configura-
tion data is using, type the following command:
show flash
The information you see might look something like this:
Size Filename
——— —————
61 “confdata”
9405 “config”
0 “passwd”
0 “hosttab”
0 “routes”
0 “ipxroute”
264 “location”
203 “script”
20 “snmp”
0 “filters”
0 “ipxfilt”
0 “sapfilt”
0 “netmasks”
Total FLASH: 262144 bytes
Used: 11393 bytes Free: 250751 bytes
No commit in progress