USRobotics NETServer/8 - Manual (Page 132)

8-18 Packet Filters
SAP Rule Options
SAP rules are only used in output filters. The rule format is as
follows:
< permit | deny>
Possible keywords are server, network, host, and socket.
server
Compare the server name of an advertised service to the server
name of the packet filter.
< permit | deny> server
network
Compare the IPX network number of the advertised service to
the network IPX address. The IPX network number must be in
hexadecimal format.
< permit | deny> network
host
The IPX node address of the service is compared to the host IPX
node address specified in the packet filter. The IPX address
must be in hexadecimal format.
< permit | deny> host
socket
Compare the server’s IPX socket number to the one given in the
filter. You must specify the type of the comparison. Valid
comparisons are: less than (lt), equal (eq), or greater than (gt).
< permit | deny> socket
SAP filter rule example
The following rule allows a packet to pass if it is an advertise-
ment from the server named sales_1 and its socket number is less
than 32.
permit server sales_1 socket lt 32