USRobotics NETServer/8 - Manual (Page 144)

9-10 Administrative Tools
Traceroute
This command identifies the routers (and the path) to a remote
host/system. The name or IP address of the remote host/
system follow the traceroute command. Use the following
command:
traceroute
The information you see might look something like this:
Command> traceroute 192.77.204.1
traceroute to (192.77.204.1), 30 hops max
1 192.77.203.1
Version
Use this command to see what version of NETServer code your
NETServer is using. U.S. Robotics Technical Support may
require you to furnish this information. Use the following
command:
version
The NETServer replies with the firmware revision number (for
example, 3.1.2) as well as the date and time that this revision
was compiled.