Unisys E-@CTION EFP9800 - Manual (Page 98)

EFP9800 ESC/POS Commands
6– 8 3255 4073– 002
Page Mode
Two types of fundamental calculation pitch are used to set the right-side
character spacing, depending on the value of the Select Print Direction in Page
Mode command (1B 54 n). For more information see “ Page Mode” later in this
section.
•
If 1B 54 n = 0 or 2, the horizontal direction of the fundamental calculation
pitch is used.
•
If 1B 54 n = 1 or 3, the vertical direction of the fundamental calculation
pitch is used.
Select Print Mode(s)
Selects the print mode(s) specified by the value of n as outlined below. The
default is 1.
Hexadecimal Decimal ASCII
1B 21 n 27 33 n ESC ! n
Value of n in Hexadecimal
Print Mode 33/35/42 Characters
per Line (5 x 9) 40/42/51 Characters
per Line (7 x 7)
Standard 00 01
Double-Strike 08 09
Double-High 10 11
Double-Wide 20 21
Double-Strike and Double-High 18 19
Double-Strike and Double-Wide 28 29
Double-High and Double-Wide 30 31
Double-Strike, Double-High, and Double-Wide 38 39
Underlined 80 81
Underlined and Double-Strike 88 89
Underlined and Double-High 90 91
Underlined, Double-Strike, and Double-High 98 99