Unisys E-@CTION EFP9800 - Manual (Page 175)

Ithaca Peripherals Proprinter Emulation Commands
3255 4073–002 7–7
Perform Validation: Close Forms Compensation Assembly
Closes the forms compensation assembly. The command is ignored if the forms
compensation assembly is already closed.
Hexadecimal Decimal ASCII
1B 13 27 19 ESC DC3
Perform Validation: Close Forms Compensation Assembly When Slip Sensed
Closes the forms compensation assembly only when a form is detected. The
Slip In LED flashes until the form is inserted correctly, when it is turned off.
Press the Paper Feed button to override the command and close the forms
compensation assembly.
Hexadecimal Decimal ASCII
1B 14 27 20 ESC DC4
Set Line Spacing to 1/8 Inch
Sets the line spacing to 1/8 inch or 8 lines/inch.
Hexadecimal Decimal ASCII
1B 30 27 48 ESC 0
Set Fine Line Spacing (n/216 Inch)
Sets the line spacing to n/216 inches.
Note: The printer rounds down the value to the closest multiple of 1/72
inches.
Hexadecimal Decimal ASCII Value of n
1B 33 n 27 51 n ESC 3 n 1-255
Set Fine Line Spacing (n/72 Inch)
Sets the line spacing to n/72 inches.
Hexadecimal Decimal ASCII Value of n
1B 41 n 1B
32 27 65 n 27
50 ESC A n ESC
2 1-85