Unisys E-@CTION EFP9800 User Manual
Page 137
EFP9800 ESC/POS Commands
3255 4073– 002
6– 47
Note: When the Enable/Disable Automatic Status Back (ASB) command is
enabled, the status transmitted by ASB and by this command must be
distinguished.
Transmit Printer ID
Transmits the printer’s ID to the host computer.
Hexadecimal Decimal ASCII Value
of
n
1D 49 n 29
73
n GS
I
n 1-3
The following table shows the printer ID as specified by n.
n Printer
ID
Specification
ID
1
Model ID
Unisys EFP9800
0A (Hex)
2
Type ID
See the next table
3
ROM Version
Indicates the version of ROM
installed
Type ID (from previous table); n = 2
Type ID Status
Bit Function
0
1
0 Two-Byte
Code
Correspondence
Always 0
No correspondence
Correspondence
1
Not Used
Always 0
2 DSW2-1
Setting Off
On
3 Undefined
4
Not Used
Always 0
5-6 Undefined
7
Not Used
Always 0