Unisys E-@CTION EFP9800 - Manual (Page 50)

Diagnostics and Print Tests
3–12 3255 4073–002
Ithaca Peripherals Proprinter Emulation: Internal Switch Pack 1, Switches 4 and 5, 7 and 8
Switch 4 Switch 5 Sets Receipt Paper Length
OFF OFF 5.5 inches.
OFF ON 8.5 inches (default).
ON OFF 11 inches.
ON ON 14 inches.
Switch 7 Switch 8 Selects Code Page
OFF OFF ESC 6 selects Code Page 850, PC Multilingual.
ESC 7 selects Code Page 437, PC US.
OFF ON ESC 6 selects Code Page 852, Eastern European.
ESC 7 selects Code Page 437, PC US.
ON OFF ESC 6 selects Code Page 865, Nordic Languages.
ESC 7 selects Code Page 437, PC US.
ON ON Unused.
NCR 5021 Internal Switch Pack Settings (Serial Interface Units Only)
NCR 5021 Emulation: Internal Switch Pack 1
Switch Settings Description
1 OFF
ON
Selects three lines of validation.
Selects six lines of validation.
2 OFF
ON
If slip is detected, both slip feed and receipt/journal feed advance.
If slip is detected, only the slip feed advances.
Note: If slip is not detected, then only the receipt/journal feed
advances.