Unisys E-@CTION EFP9800 - Manual (Page 112)

EFP9800 ESC/POS Commands
6– 22 3255 4073– 002
The command is effective only at the beginning of a line. It is ignored when n is
out of range.
Hexadecimal Decimal ASCII Value of n
1B 61 n 27 97 n ESC a n 0 = Left Justify (default)
1 = Center
2 = Right Justify
The settings do not apply in page mode.
Select Print Paper(s)
Selects the paper for printing. (See the following table.) The command is
effective only at the beginning of a line. It is ignored when n is out of range. The
default is n = 1.
Hexadecimal Decimal ASCII
1B 63 30 n 27 99 48 n ESC c 0 n
Paper Type Status
Bit Paper Type 0 1
0 Receipt/Journal Paper Disabled Enabled
1 Receipt/Journal Paper Disabled Enabled
2 Slip Disabled Enabled
3 Validation Disabled Enabled
4-7 Undefined