Unisys E-@CTION EFP9800 - Manual (Page 195)

NCR 5021 Printer Emulation Commands
3255 4073–002 8–7
The state of the forms compensation assembly can be checked with the Read
Status (1B 5B 31) command.
This command is processed only when the printer is online.
Hexadecimal Decimal ASCII
1B 5B 77 01 13 27 91 119 01 19 ESC [ w 01 13
Close Forms Compensation Assembly
Closes the forms compensation assembly.
The printer does not accept print data when the forms compensation assembly
is open. Only commands are accepted and processed when the forms
compensation assembly is open.
The state of the forms compensation assembly can be checked with the Read
Status (1B 5B 31) command.
This command is processed only when the printer is online.
Hexadecimal Decimal ASCII
1B 5B 77 01 14 27 91 119 01 20 ESC [ w 01 14
Reprint After Media Jam
Informs the printer that printing may continue after a paper jam has occurred.
The printer detects a paper jam when the jam detect sensor does not detect
movement.
The printer accepts print data, even when a paper jam occurs. If a paper jam
occurs, the printer accepts data until the print data buffer is filled. Once the
print data buffer is full, the printer goes busy.
A paper jam status is passed to the application in the response of the Read
Status (1B 5B 31) command.
Resetting the printer clears the paper jam flag, but does not clear the cause of
the paper jam.
This command is processed only when the printer is online.
Hexadecimal Decimal ASCII
1B 5B 77 01 16 27 91 119 1 22 ESC ] w 01 16