Print characteristics commands, Cancel slip waiting –13, Print characteristics commands –13 – Unisys E-@CTION EFP9800 User Manual

Page 217: Double-wide font –13, Double-wide off –13

EF4270 Emulation Commands

3255 4073–002

9–13

Cancel Slip Waiting

Cancels slip waiting. The communication buffer is cleared and the printer
returns to roll mode. The command is executed immediately after it is received.

Hexadecimal Decimal ASCII

1B 7E

27 126

ESC ~

Print Characteristics Commands

These commands affect the appearance of printed information. They control the
following:

•

Character set selection

•

Character formatting

•

Print orientation

The commands are listed numerically by hexadecimal code.

Double-Wide Font

Starts double-wide printing. The pitch of the double-wide font is half of the
currently selected font. If the currently selected font is 40 characters per line
(13.9 pitch), the double-wide characters will print at 20 characters per line (6.9)
lines per inch.

This command may be used with the Double-High command 1B 48.

Hexadecimal Decimal ASCII

0E 14

Double-Wide Off

Turns off double-wide printing.

Hexadecimal Decimal ASCII

0F 15