Toshiba E.STUDIO e-STUDIO 523 - Manual (Page 134)

132
4.SETTING ITEMS (ADMIN)
3.SETTING NETWORK FUNCTIONS (Cont.)
4
3 Specify following items as required.
• ENABLE APPLETALK — Press the [ENABLE] button to enable the AppleTalk, or [DISABLE] button to disable
the AppleTalk.
• [DEVICE NAME] — Press this to enter the AppleTalk name of this equipment.
• [DESIRED ZONE] — Press this to enter the AppleTalk zone name this equipment joins. If your AppleTalk net-
work has not been configured with a zone, you do not have to enter the zone name.
When you press the [APPLETALK NAME] and [DESIRED ZONE] buttons, the input screen is displayed. Enter
the value using the keyboard and digital keys, and press the [ENTER] button to set the entry.
4 Press the [ENTER] button.
• Returns you to the NETWORK menu.
5 Continue to another network setting if required, then press the
[APPLY NOW] button.
• The "NETWORK INITIALIZING" message is displayed and this equipment starts initializing the network inter-
face card to apply the changes.