Toshiba E.STUDIO e-STUDIO 523 - Manual (Page 123)

121
4
7 Press the [ENTER] button.
• Returns you to the NETWORK menu.
8 Continue to another network setting if required, then press the
[APPLY NOW] button.
• The “NETWORK INITIALIZING” message is displayed and this equipment starts initializing the network inter-
face card to apply the changes.
If Duplicate Address Detection (DAD) detects duplicate addresses, the message “IPv6 ADDRESS CONFLICT” is
displayed on the touch panel.
Setting the IPv6 Protocol automatically (in the stateful network environment)
1 Press the [NETWORK] button in the ADMIN menu.
• The NETWORK menu is displayed.