Toshiba E.STUDIO e-STUDIO 523 - Manual (Page 117)

115
4
3 Press the [STATIC] button in the “ADDRESS MODE” option.
4 Press the [IP ADDRESS] button and enter the IP address of this
device using the digital keys. Enter also the subnet mask and default
gateway as required.
5 Press the [ENTER] button.
• Returns you to the NETWORK menu.
6 Continue to another network setting if required, then press the
[APPLY NOW] button.
• The "NETWORK INITIALIZING" message is displayed and this equipment starts initializing the network inter-
face card to apply the changes.