Locate – TANDBERG Gatekeeper/Border Controller API D14172.01 User Manual
Page 83

TANDBERG Gatekeeper/Border Controller API User Guide
D14172.01
page 83 of 84
Bandwidth Call [1..900] Duration:
Shows the duration of the call in seconds.
Bandwidth Call [1..900] SourceAlias:
Shows the alias of the source call party.
Bandwidth Call [1..900] SourceAddress:
Shows the IP address and port of the source call party.
Bandwidth Call [1..900] DestinationAlias:
Shows the alias of the destination call party.
Bandwidth Call [1..900] DestinationAddress:
Shows the IP address and port of the destination call party.
Locate
LocateResult Result:
Shows the result of the search.
LocateResult Alias [type =
Shows the type of the alias being searched for.
LocateResult Alias:
Shows the value of the alias being searched for.
LocateResult CallSerialNumber:
Shows the unique serial number of the call
LocateResult Location Type:
Shows the type of location being searched.
LocateResult Location Alias [type =
Shows the type of the alias this location is being searched with.
LocateResult Location Alias:
Shows the alias this location is being searched with.
Note: The alias may be different from the original search alias if transforms have been
applied.
LocateResult Location Address:
Shows the IP address and port of the location being searched. Only present if the Location
Type is Neighbor or Traversal.
LocateResult Location Result:
Shows the result of searching this location
LocateResult Location Reason:
Shows a description of the reason the search of this location failed. Only present if the
Location Result is Failed and the Location Type is Neighbor or Traversal.