TANDBERG Gatekeeper/Border Controller API D14172.01 - Manual (Page 64)

TANDBERG Gatekeeper/Border Controller API User Guide
D14172.01 page 64 of 84
ResourceUsage TotalNonTraversalCalls:
Shows the total number of non traversal calls that have been placed on the system. Only
present if the system is a Gatekeeper.
ResourceUsage TraversalCalls:
Shows the current number of traversal calls on the system.
ResourceUsage MaxTraversalCalls:
Shows the maximum number of concurrent traversal calls on the system.
ResourceUsage TotalTraversalCalls:
Shows the total number of traversal calls placed on the system.
Gatekeeper
Gatekeeper Alternates Alternate [1..5] [status = ]
Shows the status of the connection to an alternate system.
Gatekeeper Alternates Alternate [1..5] Cause:
Shows an error reason for a failure to connect to the alternate system. Only present if the
alternate status if Failed.
Gatekeeper Alternates Alternate [1..5] Address:
Shows the address of the alternate system.
Gatekeeper Alternates Alternate [1..5] Port:
Shows the port of the alternate system.
Calls
Calls Call [1..900] SerialNumber:
Shows the unique serial number of the call.
Calls Call [1..900] State: /ConnectionFailed/Parked/Parking/Unparking/ParkFailed>
Shows the state of the call.
Calls Call [1..900] CallType:
Shows the type of the call.
Calls Call [1..900] Transferable:
Shows whether this call is capable of being transferred.
Calls Call [1..900] Bandwidth:
Shows the bandwidth in kbps for the call.
Calls Call [1..900] Route Zone:
Shows the name of a zone that is part of the route the call takes.
Calls Call [1..900] Route Link:
Shows the name of a link that is part of the route the call takes.