3 event.xml – xevent, Callattempt – TANDBERG Gatekeeper/Border Controller API D14172.01 User Manual
Page 74

TANDBERG Gatekeeper/Border Controller API User Guide
D14172.01
page 74 of 84
5.3
event.xml – xevent
CallAttempt
CallAttempt Call [1..900] SerialNumber:
Shows the unique serial number of the call.
CallAttempt Call [1..900] State:
Shows the state of the call.
CallAttempt Call [1..900] CallType:
Shows the type of the call.
CallAttempt Call [1..900] Transferable:
Shows whether this call is capable of being transferred.
CallAttempt Call [1..900] Bandwidth:
Shows the bandwidth in kbps for the call.
CallAttempt Call [1..900] Route Zone:
Shows the name of a zone that is part of the route the call takes.
CallAttempt Call [1..900] Route Link:
Shows the name of a link that is part of the route the call takes.
CallAttempt Call [1..900] Leg [1..2] RegistrationID:
Shows the registration ID of the call party if it is locally registered.
CallAttempt Call [1..900] Leg [1..2] SerialNumber:
Shows the serial number of the call party registration. Only present if the call party is locally
registered.
CallAttempt Call [1..900] Leg [1..2] Alias [type =
Shows the type of the call party alias.
CallAttempt Call [1..900] Leg [1..2] Alias:
Shows the alias of the call party.
CallAttempt Call [1..900] Leg [1..2] Address:
Shows the IP address and port of the call party.
CallAttempt Call [1..900] Leg [1..2] Encryption [status =
Shows the status of encryption on the call leg.
CallAttempt Call [1..900] Leg [1..2] Encryption CheckCode:
Shows the check code for the encrypted call leg. Only present if encryption status is On.
CallAttempt Call [1..900] StartTime:
Shows the time at which the call was initiated.