TANDBERG Gatekeeper/Border Controller API D14172.01 - Manual (Page 38)

TANDBERG Gatekeeper/Border Controller API User Guide
D14172.01 page 38 of 84
IP DNS Server [1..5] Address:
Sets the IP Address of up to 5 DNS servers to be queried when resolving domain names.
IP DNS Domain Name:
Specifies the name to be appended to the host name before a query to the DNS server is
executed. Used only when attempting to resolve a domain name which is not fully qualified.
NTP Address:
Sets the IP Address or FQDN of the NTP server to be used when synchronizing system
time.
TimeZone Name:
Sets the local time zone of the system. Time zone names follow the POSIX naming
convention e.g. Europe/London or America/New_York.
LDAP Server Address:
Sets the IP Address or FQDN of the LDAP server to be used when making LDAP queries.
LDAP Server Port: <1..65534>
Sets the IP port of the LDAP server to be used when making LDAP queries.
LDAP UserDN:
Sets the user distinguished name to be used when binding to the LDAP server.
LDAP Password:
Sets the password to be used when binding to the LDAP server.
LDAP Encryption:
Sets the encryption to be used for the connection to the LDAP server. Off: no encryption is
used. TLS: TLS encryption is used.
SNMP Mode:
Enables or disables SNMP support.
Note: You must restart the system for any changes to take effect.
SNMP CommunityName:
Specifies the system's SNMP community name.
SNMP SystemContact:
Specifies the name of the person who can be contacted regarding issues with the system.
SNMP SystemLocation:
Specifies the physical location of the system.
Session TimeOut: <0..65534>
Sets the number of minutes that an administration session (HTTPS, Telnet or SSH) may be
inactive before the session is timed out. A value of 0 turns session time outs off.
Telnet Mode:
Determines whether the system can be accessed via telnet.
Note: You must restart the system for any changes to take effect.