beautypg.com

Ldap – TANDBERG Gatekeeper/Border Controller API D14172.01 User Manual

Page 62

background image

TANDBERG Gatekeeper/Border Controller API User Guide

D14172.01

page 62 of 84

IP IPv6 Gateway:

Shows the IPv6 address of the default gateway. Only present if the Protocol is IPv6 or Both.

IP DNS Server [1..5] Address:

Shows the IP address of a configured DNS server.

IP DNS Domain Name:

Shows the DNS domain to which the system belongs.

NTP

NTP [status = ]

Shows the status of the connection to the NTP server.

NTP Cause:

Shows an error reason for a failure to connect to the NTP server. Only present if the NTP
status is Failed.

NTP Address:

Shows the address of the NTP server. Only present if the NTP status is Active or Failed.

NTP Port:

Shows the port of the NTP server. Only present if the NTP status is Active or Failed.

NTP LastUpdate:

Shows the time at which the last NTP update occurred. Only present if the NTP status is
Active.

NTP LastCorrection:

Shows the last correction to the time that occurred. Only present if the NTP status is Active.

LDAP

LDAP [status = ]

Shows the status of the connection to the LDAP server.

LDAP Reason:

Shows an error reason for a failure to connect to the LDAP server. Only present if the LDAP
status is Failed or Inactive.

LDAP Cause:

Shows an error reason for a failure to connect to the LDAP server. Only present if the LDAP
status is Failed or Inactive and the Reason is not "Not configured".

LDAP Address:

Shows the address of the LDAP server. Only present if the LDAP status is Active or Failed.

LDAP Port:

Shows the port of the LDAP server. Only present if the LDAP status is Active or Failed.