Zones – TANDBERG Gatekeeper/Border Controller API D14172.01 User Manual
Page 67

TANDBERG Gatekeeper/Border Controller API User Guide
D14172.01
page 67 of 84
Zones
Zones DefaultZone Calls Call [1..900]:
Shows the index of a call in the Default Zone.
Zones DefaultZone Bandwidth Total:
Shows the total bandwidth in kbps allowed in the Default Zone.
Zones DefaultZone Bandwidth PerCall:
Shows the bandwidth in kbps allowed per call in the Default Zone.
Zones DefaultZone Bandwidth Used:
Shows the bandwidth in kbps being used in the Default Zone.
Zones TraversalZone [1..50] [status =
Shows the status of the connection to the traversal zone.
Zones TraversalZone [1..50] Cause:
Shows an error reason for a failure to communicate with the traversal zone. Only present if
the traversal zone status is Failed or Warning.
Zones TraversalZone [1..50] Name:
Shows the name of the traversal zone.
Zones TraversalZone [1..50] Traversal:
Shows the traversal type of the traversal zone.
Zones TraversalZone [1..50] AccountName:
Shows the account name for the traversal zone.
Zones TraversalZone [1..50] Gatekeeper [1..6] [status =
Shows the status of the connection to the gatekeeper in the traversal zone.
Zones TraversalZone [1..50] Gatekeeper [1..6] Cause:
Shows an error reason for a failure to communicate with the gatekeeper. Only present if the
gatekeeper status is Failed.
Zones TraversalZone [1..50] Gatekeeper [1..6] Address:
Shows the address for a gatekeeper in the traversal zone.
Zones TraversalZone [1..50] Gatekeeper [1..6] Port:
Shows the port for a gatekeeper in the traversal zone.
Zones TraversalZone [1..50] Calls Call [1..900]:
Shows the index of a call in the traversal zone.
Zones TraversalZone [1..50] Bandwidth Total:
Shows the total bandwidth in kbps allowed in the traversal zone.