TANDBERG Gatekeeper/Border Controller API D14172.01 - Manual (Page 78)

TANDBERG Gatekeeper/Border Controller API User Guide
D14172.01 page 78 of 84
ConnectionFailure Call [1..900] StartTime:
Shows the time at which the call was initiated.
ConnectionFailure Call [1..900] Duration:
Shows the duration of the call in seconds.
ConnectionFailure Call [1..900] DisconnectCauseValue:
Shows the reason the call failed.
ConnectionFailure Call [1..900] DisconnectCause:
Shows a description of the reason the call failed.
ConnectionFailure Call [1..900] SourceAlias:
Shows the alias of the source call party.
ConnectionFailure Call [1..900] SourceAddress:
Shows the IP address and port of the source call party.
ConnectionFailure Call [1..900] DestinationAlias:
Shows the alias of the destination call party.
ConnectionFailure Call [1..900] DestinationAddress:
Shows the IP address and port of the destination call party. Only present if the destination
address could be determined.
Registration
Registration Registration [1..3750] CallSignalAddresses Address [1..10]:
Shows the IP address and port to use for call signaling.
Registration Registration [1..3750] RASAddresses Address [1..10]:
Shows the IP address and port to use for RAS signaling.
Registration Registration [1..3750] Endpoint:
Shows that the registration is an endpoint. Only present if the registration is an endpoint.
Registration Registration [1..3750] Gatekeeper:
Shows that the registration is a gatekeeper. Only present if the registration is a gatekeeper.
Registration Registration [1..3750] Gateway:
Shows that the registration is a gateway. Only present if the registration is a gateway.
Registration Registration [1..3750] Gateway Prefix [1..200]:
Shows the prefix of a registered gateway service. Only present if the registration is a
gateway.
Registration Registration [1..3750] MCU:
Shows that the registration is an MCU. Only present if the registration is an MCU.