TANDBERG Gatekeeper/Border Controller API D14172.01 - Manual (Page 53)

TANDBERG Gatekeeper/Border Controller API User Guide
D14172.01 page 53 of 84
PerCallIntraMode:
Determines whether there is a limit on the bandwidth for any one call between two
endpoints within this subzone.
PerCallIntra: <1..100000000>
Specifies the bandwidth limit (in kbps) for any one call between two endpoints within
this subzone (applies only if Mode is set to Limited).
SubZoneDelete
Deletes a subzone.
SubZoneId(r): <1..100>
The index of the subzone to be deleted.
TransformAdd
Adds a new destination alias transform.
Pattern(r):
Specifies the pattern against which the alias is compared.
Type:
Determines the way in which the string must match the alias. Prefix: the string must
appear at the beginning of the alias. Suffix: the string must appear at the end of the
alias. Regex: the string will be treated as a regular expression.
Behavior:
Determines how the matched part of the alias will be modified. Strip: the matching
prefix or suffix will removed from the alias. Replace: the matching part of the alias will
be substituted with the text in the Replace string.
Replace:
(Applies only if pattern behavior is set to Replace.) Specifies the string to be used as a
substitution for the part of the alias that matched the pattern.
Priority: <0..65534>
Assigns a priority to the specified transform. Transforms are applied in order of
priority, and the priority must be unique for each transform.
TransformDelete
Deletes a transform.
TransformId(r): <1..200>
The index of the transform to be deleted.
TraversalZoneAdd
Adds a new traversal zone.
TraversalZoneName(r):
Assigns a name to this traversal zone.
Mode(r):
Determines which H.323 traversal protocol to use, either Assent or H.460.18.
AccountName:
Specifies the account name to be used when connecting to an Assent Traversal Zone.
Gatekeeper1Address:
Specifies the IP Address or FQDN of the traversal server. Up to five alternate traversal
servers can also be specified.
Gatekeeper1Port: <1..65534>
(Applies only if the system is a Gatekeeper.) Specifies the port on the traversal server
to connect to.