TANDBERG Gatekeeper/Border Controller API D14172.01 - Manual (Page 44)

TANDBERG Gatekeeper/Border Controller API User Guide
D14172.01 page 44 of 84
Zones Zone [1..100] Match [1..5] Pattern Type:
(Applies only if the Match mode is Pattern Match.) Determines the way in which the string
must match the alias. Prefix: the string must appear at the beginning of the alias. Suffix: the
string must appear at the end of the alias. Regex: the string will be treated as a regular
expression.
Zones Zone [1..100] Match [1..5] Pattern Behavior:
(Applies only if the Match mode is Pattern Match.) Determines whether the matched part of
the alias should be modified before an LRQ is sent to this zone. Leave: the alias will be
unmodified. Strip: the matching prefix or suffix will be removed from the alias. Replace: the
matching part of the alias will be substituted with the text in the Replace string.
Zones Zone [1..100] Match [1..5] Pattern Replace:
(Applies only if the Pattern Behavior is Replace.) Specifies the string to be used as a
substitution for the part of the alias that matched the pattern.
Zones TraversalZone [1..50] Name:
Assigns a name to this traversal zone.
Zones TraversalZone [1..50] Mode:
Determines which H.323 traversal protocol to use, either Assent or H.460.18.
Zones TraversalZone [1..50] AccountName:
Specifies the account name to be used when connecting to an Assent Traversal Zone.
Zones TraversalZone [1..50] Gatekeeper [1..6] Address:
Specifies the IP Address or FQDN of the traversal server. Up to five alternate traversal
servers can also be specified.
Zones TraversalZone [1..50] Gatekeeper [1..6] Port: <1..65534>
(Applies only if the system is a Gatekeeper.) Specifies the port on the traversal server to
connect to.
Zones TraversalZone [1..50] HopCount: <1..255>
Specifies the hop count to be used when sending an alias search request to this zone.
Note: If the search request was received from another zone and already has a hop count
assigned, the lower of the two values will be used.
Zones TraversalZone [1..50] Match [1..5] Mode:
Determines if and when a query will be sent to this zone. Always: the zone will always be
queried. Pattern: the zone will only be queried if the alias queried for matches the
corresponding pattern. Disabled: the zone will never be queried.
Zones TraversalZone [1..50] Match [1..5] Pattern String:
(Applies only if the Match mode is Pattern Match.) Specifies the pattern against which the
alias is compared.