Toshiba E-STUDIO 210C - Manual (Page 94)

1
2
3
4
5
6
7
8
9
10
11
12
6-2
USING THE SPECIAL FUNCTIONS
2 Place the original(s). Page 2-9
- Maximum number of originals that can be set Page 2-9
3 Press the PROGRAM key to enter the programme
menu, and press the ADF key.
1. CONTINUOUS ORIGINAL FEEDING / SINGLE ORIGINAL FEEDING
When using the optional reversing automatic document feeder, you can select the continuous feed
mode (default setting) where multiple (or single) originals are continuously fed in one by one, or the
single-feed mode where if you insert an original, it is automatically pulled in and starts being copied.
Continuous Feed Mode
1 Place paper in the cassette(s). Page 2-4
4 Press the ADF key.
When the number of originals is too large to be set at one
time, you can divide the originals into two to four sets and set
them one after another. To do so, place the last set of originals
first, and press the CONTINUE key while the scanning is in
progress. After they have been scanned, place the previous
set of originals.
Select other copy modes as required.
5 Press the START key.