Toshiba E-STUDIO 210C - Manual (Page 73)

1
2
3
4
5
6
7
8
9
10
11
12
5-3
1 Press the EDIT key to enter the editing menu, and
press the IMAGE SHIFT key.
3 Adjust the width of the margin, then press the SET
key.
- The default width of the margin is 14 mm.
- To adjust the width, press the 2mm or 30mm key to
select the desired number, then press the SET key.
6 Press the START key.
Providing a Bookbinding Margin
5 Adjust the binding margin, then press the SET key.
- The default width of the margin is 7 mm.
- To adjust the width, press the 0mm or 30mm key to
select the desired number, then press the SET key.
- In duplex copying, margins on the back are created on the
other side of those in the front.
Duplex copying Page 3-7
Select other copy modes as required.
When Book Margin is selected, use it in conjunction with the Duplex Copying mode from book-type
originals (
Page 3-11) or the Dual-Page mode (double-sided) ( Page 5-6).
2 Press the BOOK key.