Toshiba E-STUDIO 210C - Manual (Page 56)

1
2
3
4
5
6
7
8
9
10
11
12
3-12
SETTING OF BASIC COPY MODES
8 Turn to the next page, set the book again and press
the START key.
- Pressing the YES key and then the START key also
continues copying.
- Repeat the procedure above until all your originals have been
scanned.
9 After all your originals have been scanned, press the
FINISHED key.
- Press the COPY FINAL PAGE key if the last original has
only one page.
7 Place the first page(s) to be copied on the glass, and
press the START key.
- If you do not copy your originals from the first page, the
copies will not be arranged in the same order as the origi-
nal.
- Centre the book on the yellow indicator line with its bottom
toward you. Book-type originals Page 2-10
3. DUPLEX COPYING (1-SIDED, 2-SIDED, BOOK-TYPE) (Cont.)
5 Press the BASIC key to enter the basic menu, then
select A4 or B5 copy size.
6 If you need a binding space, select the book margin
mode from the Image Shift function ( Page 5-3) .
Select other copy modes as required.
4 Select the book copying type.
- Press the RIGHT RIGHT key if copying should start at a
right-hand page and end at a right-hand page. By the same
token, you can choose from among the RIGHT
LEFT ,
LEFT LEFT and LEFT RIGHT keys.
3 Press the BOOK 2 key.
Indicator line