Toshiba E-STUDIO 210C - Manual (Page 43)

1
2
3
4
5
6
7
8
9
10
11
12
2-17
5. INTERRUPT COPYING
While multicopying is in progress, you can interrupt it and make copies from different originals. Only sheets
that have already been set (in the cassette, optional large-capacity feeder or sheet bypass) are available in
interrupt copying.
*The following functions are not available:
- duplex
- book centre erase - dual-page - full image
- 2 IN 1/4 IN 1 - X-Y zoom - trimming/masking - centring
- image repeat - mixed-sized originals - mode memory - user selection
- sort/group - staple sorting - magazine sort - saddle stitching
- hole punching
HELP
2 Replace the original with a new one.
During the interruption, the reversing automatic document
feeder (optional) and automatic duplexer (optional) are in-
operable.
Select other copy modes as required.
3 Press the START key.
- You can make multiple copies by pressing the START key
once for each copy desired.
4 After you have finished interrupt copying, press the
INTERRUPT key again.
- The following message appears:
READY to resume job 1
1 Press the INTERRUPT key.
- This message appears:
Job interrupted job 1 saved
5 Press the START key.
- The remaining number of copies in the previous multicopy
run will be made automatically.