Toshiba E-STUDIO 210C - Manual (Page 124)

1
2
3
4
5
6
7
8
9
10
11
12
6-32
USING THE SPECIAL FUNCTIONS
Clearing the Off-Mode/Sleep Mode
Turn ON the power switch once again when the copier is in the
off-mode. Press the START key during the sleep mode. The
copier starts to warm itself up.
1 Press the PROGRAM key to enter the programme
menu, and press the AUTO SHUT OFF key.
- If the key for the desired function is not shown, press the
Next key to switch the screen.
This function allows the copier to automatically turn its power OFF when it is left inactive for a specified
period of time.
When the power is supplied to the optional printer controller, the copier will go into the sleep
mode and it will stand by with the minimum power consumption.
2 Select the period of time (in minutes) on the dis-
play allowed before the Off-mode (the Sleep mode
if the power is being supplied to the optional printer
controller) is activated.
- The setting procedure finishes and the display returns to the
programme menu screen.
- The default setting is ‘OFF’.
If you do not want to use the off-mode, select the OFF key.
14. SETTING THE OFF-MODE (AUTO SHUTOFF)