Toshiba E-STUDIO 210C - Manual (Page 100)

1
2
3
4
5
6
7
8
9
10
11
12
6-8
USING THE SPECIAL FUNCTIONS
3. BYPASS COPYING (Cont.)
2 Press the NON-STANDARD key.
1 Perform steps 1 to 3 on page 6-7.
The size of non-standard paper is within the following ranges:
Length: 100 ~ 305mm Width: 148 ~ 457mm Page 6-5 (table)
Bypass Copying on Non-standard Size Paper
3 Key in each dimension (length and width) with the
digital keys, or recall the data stored in the MEMORY.
Then press the lower SET key.
- When using the digital keys to key in the size:
Key in the length with the digital keys and press the upper
SET key. Simlarly, set the value for the width.
- Press the MEMORY 1 ( MEMORY 2 , MEMORY 3 or
MEMORY 4 ) key and the paper size memorized in the
MEMORY 1 appears.
- Storing a non-standard size in the memory Page 6-9
Select other copy modes as required.
4 Press the START key.